=ThatCalc
Calculators / Home & Yard

Stair Calculator

Lay out a straight staircase: how many steps, how tall each riser is, how far the stairs run and how long the stringers are.

Risers (steps up)
—
Each riser—
Treads—
Total run—
Stringer length—
Was this calculator helpful?

How it's calculated

risers = total rise ÷ max riser height, rounded up riser height = total rise ÷ risers treads = risers − 1 total run = treads × tread depth stringer length ≈ √(rise² + run²)

Example

A 108 inch rise with a 7.75 inch maximum riser needs 14 risers of 7.71 inches each. That gives 13 treads; at 10 inches each, the stairs run 130 inches. The stringer is about 169 inches (14.1 ft) before cuts.

Tips

The International Residential Code, used in many US areas, limits risers to 7¾ inches and requires treads of at least 10 inches. Keep every riser the same height; uneven steps trip people. Buy stringer stock a couple of feet longer than the calculated length to allow for cuts.

Common questions

What is the maximum riser height?

Under the International Residential Code it's 7¾ inches, with treads at least 10 inches deep. Your local code may differ.

Why are there fewer treads than risers?

The top step lands on the upper floor, so a staircase always has one fewer tread than risers.

How long should the stringer board be?

At least the calculated stringer length, plus some extra for the top and bottom cuts. A 2×12 is the usual choice.

These numbers are estimates. Building codes and conditions vary, so confirm with your local building department or a qualified pro before you build or buy.

Related calculators