=ThatCalc
Calculators / Home & Yard

Deck Board Calculator

Find out how many deck boards and deck screws a rectangular deck needs, including a little extra for cuts.

Deck boards
—
Rows of boards—
Linear feet—
Joists crossed—
Screws (2 per joist)—
Was this calculator helpful?

How it's calculated

rows = deck width (in) ÷ (board width + gap), rounded up linear feet = rows × deck length × (1 + extra %) boards = linear feet ÷ board length, rounded up joists = deck length (in) ÷ joist spacing + 1 screws = rows × joists × 2

Example

A 16 ft × 12 ft deck with 5.5 inch boards and 1/8 inch gaps needs 26 rows. With 10% extra that is about 458 linear feet, or 29 boards at 16 ft. With joists every 16 inches, each row crosses 13 joists, so plan on about 676 screws.

Tips

Buy boards long enough to span the deck in one piece when you can; it looks better and saves cuts. If you need butt joints, stagger them and land each one on a joist. Hidden fastener systems use their own count, so check the package if you go that route.

Common questions

How many screws per deck board?

Two screws at every joist the board crosses is the standard. A 16 ft board over joists at 16 inches crosses 13 joists, so it takes 26 screws.

What gap should deck boards have?

About 1/8 inch for wood is common. Composite and PVC makers list their own gap, often based on temperature, so follow the instructions for your boards.

Does this include framing?

No. This counts only the deck surface boards and screws, not joists, beams, posts or railings.

These numbers are estimates for planning. Measurements, materials and products vary, so check with your supplier or the product label before you buy, and follow local codes for structural work.

Related calculators