=ThatCalc
Calculators / Home & Yard

Roofing Calculator

Estimate roof area, squares and bundles of shingles from the size of the house and the roof pitch.

Bundles of shingles
—
Pitch factor—
Roof area—
Squares (with extra)—
Was this calculator helpful?

How it's calculated

pitch factor = √(1 + (rise ÷ 12)²) roof area = footprint length × width × pitch factor squares = roof area × (1 + extra %) ÷ 100 bundles = squares × bundles per square, rounded up

Example

A 40 × 30 ft footprint with a 6/12 pitch has a pitch factor of 1.118, so the roof surface is about 1,342 sq ft. With 10% extra that is 14.8 squares, or 45 bundles at 3 bundles per square.

Tips

Hips, valleys and dormers add waste, so use 15% or more on a complex roof. Starter strip, ridge cap, underlayment and flashing are separate. Roofing is dangerous work; use fall protection, and consider a pro for steep or high roofs.

Common questions

What is a roofing square?

One square is 100 square feet of roof surface.

How many bundles are in a square?

Most standard shingles come 3 bundles per square, but some heavier styles use 4 or more. The wrapper lists it.

How do I find my roof pitch?

Pitch is how many inches the roof rises over 12 inches of horizontal run. Measure 12 inches level from the roof surface and measure straight up to the roof.

These numbers are estimates for planning. Measurements, materials and products vary, so check with your supplier or the product label before you buy, and follow local codes for structural work.

Related calculators