=ThatCalc
Calculators / Home & Yard

Insulation Calculator

Work out how many rolls, batts or bags of insulation an attic or set of walls takes, using the coverage printed on the package.

Packages to buy
—
Area—
With extra—
Was this calculator helpful?

How it's calculated

area = length × width needed = area × (1 + extra %) packages = needed ÷ coverage per package, rounded up

Example

A 40 × 30 ft attic floor is 1,200 sq ft. With 5% extra and packages that cover 40 sq ft each, buy 32 packages.

Tips

Coverage on blown-in insulation bags depends on how deep you go for a given R-value, so read the chart on the bag for the R-value you want. Recommended R-values depend on your climate; the U.S. Department of Energy and ENERGY STAR publish guidance by region. Wear a mask, goggles and long sleeves.

Common questions

Where do I find coverage per package?

It's printed on the label. For blown-in insulation, the bag has a chart showing coverage for each R-value.

Should I subtract studs or joists?

Batt and roll labels already assume standard framing spacing, so use the full area. This keeps the math simple and gives you a little extra.

What R-value do I need?

It depends on your climate zone and whether it's an attic, wall or floor. Check ENERGY STAR or Department of Energy recommendations for your area.

These numbers are estimates for planning. Measurements, materials and products vary, so check with your supplier or the product label before you buy, and follow local codes for structural work.

Related calculators