Fence Calculator
Count the posts, rails, pickets and concrete you need for a straight run of wood privacy or picket fence.
How it's calculated
Example
A 100 ft fence with posts every 8 ft has 13 sections and 14 posts. With 2 rails per section that is 26 rails, and 5.5 inch pickets set tight need 219 pickets. Setting 4×4 posts in 10 inch holes, 24 inches deep, takes about 22 bags of 80 lb concrete.
Tips
This assumes one straight run. Add a post at every corner and on both sides of each gate. Call 811 before you dig so underground utility lines get marked; it's free. Check local rules on fence height and how far back from the property line you need to be.
Common questions
How far apart should fence posts be?
Most wood fences space posts 6 to 8 feet apart. Closer spacing makes a stronger fence, especially in wind or with heavy panels.
How deep should fence posts be?
A common rule is to bury about a third of the post's length, and to go below the frost line in cold climates. Check what your local code or supplier recommends.
Does this include gates and corners?
No. Add one extra post for each corner and two for each gate, plus the gate hardware.
These numbers are estimates for planning. Measurements, materials and products vary, so check with your supplier or the product label before you buy, and follow local codes for structural work.