=ThatCalc
Calculators / Home & Yard

Wallpaper Calculator

Count the rolls of wallpaper a room takes by working out how many full-height strips each roll gives you, including pattern repeat.

Rolls to buy
—
Strips needed—
Full strips per roll—
Was this calculator helpful?

How it's calculated

strips needed = (wall width − skipped openings) × 12 ÷ roll width, rounded up strip length = wall height + pattern repeat strips per roll = roll length ÷ strip length, rounded down rolls = strips needed ÷ strips per roll, rounded up

Example

A 12 × 14 ft room has 52 ft of wall. Skipping a 3 ft door with 20.5 inch wide rolls takes 29 strips. With 8 ft walls and no repeat, a 33 ft roll gives 4 strips, so buy 8 rolls. With a 21 inch pattern repeat you only get 3 strips per roll, so buy 10.

Tips

Pattern repeat is the big one: matching the pattern wastes paper on every strip. Buy all rolls from the same batch (dye lot) and get one extra, since a later roll may not match. Check the label: roll sizes vary, and some are sold as single rolls but priced per double roll.

Common questions

What is pattern repeat?

The vertical distance before the pattern starts over. It's printed on the label. Each strip needs extra length so the pattern lines up with the next one.

Why not just divide square footage by roll coverage?

Wallpaper goes up in full-height strips, and leftover pieces from each roll are often too short to use. Counting strips gives a more realistic number.

Should I subtract windows?

Usually not. Strips still run above and below most windows, so only skip doors and very large openings.

These numbers are estimates for planning. Measurements, materials and products vary, so check with your supplier or the product label before you buy, and follow local codes for structural work.

Related calculators