=ThatCalc
Calculators / Home & Yard

Sod and Grass Seed Calculator

Figure out how much sod or grass seed a lawn takes, using the numbers from your supplier or seed bag.

Lawn area
—
Sod rolls—
Sod pallets—
Grass seed—
Was this calculator helpful?

How it's calculated

area = length × width sod rolls = area × (1 + extra %) ÷ roll size, rounded up pallets = area × (1 + extra %) ÷ pallet coverage, rounded up seed (lbs) = area ÷ 1,000 × seed rate

Example

A 40 × 25 ft lawn is 1,000 sq ft. With 5% extra that is 105 rolls of 10 sq ft sod, or 3 pallets at 450 sq ft each. Seeding at 6 lbs per 1,000 sq ft takes 6 lbs of seed.

Tips

Pallet sizes vary by farm, so ask your supplier how many square feet a pallet covers. Seed rates depend on the grass type and whether it's a new lawn or overseeding; overseeding usually uses less. Lay sod soon after delivery and water it right away.

Common questions

How many square feet is a roll of sod?

Many standard rolls are 2×5 ft, which is 10 sq ft. Big rolls and other sizes exist, so check with your supplier.

How much grass seed do I need?

It depends on the grass. The bag lists a rate in pounds per 1,000 sq ft for new lawns and for overseeding. Enter that rate.

Should I order extra sod?

About 5% extra covers cuts around beds, curves and walkways.

These numbers are estimates for planning. Measurements, materials and products vary, so check with your supplier or the product label before you buy, and follow local codes for structural work.

Related calculators