=ThatCalc
Calculators / Home & Yard

Retaining Wall Calculator

Count the wall blocks and cap stones for a landscape retaining wall.

Wall blocks
—
Blocks per row—
Rows—
Cap stones—
Was this calculator helpful?

How it's calculated

blocks per row = wall length (in) ÷ block length, rounded up rows = wall height (in) ÷ block height, rounded up blocks = per row × rows × (1 + extra %), rounded up caps = wall length (in) ÷ cap length, rounded up

Example

A 30 ft wall, 3 ft high, built from blocks with a 12×4 inch face takes 30 blocks per row and 9 rows. With 5% extra that is 284 blocks, plus 30 cap stones.

Tips

Most block walls need a compacted gravel base, a buried first course and gravel backfill with drainage behind the wall. Taller walls, walls near driveways or slopes, and walls that hold back a lot of soil often need an engineer and a permit, so check local rules before you build.

Common questions

Do I count the buried course in the height?

Yes. Enter the total height including the course below grade so you buy enough blocks.

How tall can I build without a permit?

It depends on where you live. Many areas require a permit or engineering above a certain height, often around 3 to 4 feet, so check with your local building department.

What goes behind the wall?

Usually drainage gravel and often a perforated drain pipe at the base, so water doesn't build up and push on the wall.

These numbers are estimates for planning. Measurements, materials and products vary, so check with your supplier or the product label before you buy, and follow local codes for structural work.

Related calculators